Description
Binding Store offer For Sale this RENZ DTP340a with 2:1 and 3:1 round dies. This machine does not have the push out feature or automatic punch feature so essentially it is specked exactly the same as the RENZ DTP340M. The dies alone would cost £2900+VAT if bought new from the manufacturer.
- The punching capacity on the DTP 340 is 35 sheets (80gsm). For a desktop machine of this size this is one of the thickest in the market at present.
- The machine has a punching width of up to 340mm which allows for paper sizes up to A3 on the short edge to be punched
- The punching cycle only takes 1 second and the paper is punched vertically allowing for accuracy along the whole of the paper edge.
- A wide range of wire, spiral and comb dies are avaliable in 2:1 and 3:1 pitch. Square and round hole dies are all available to. These dies are interchangable and can be simply changed in under 1 minute, therfore saving the operator valuable time.
- Each die has disengageable punching pins so you can select the correct amount of holes to be punch according to what document you are punching.
| Min. punching width | 10 mm |
| Max. punching width | 340 mm |
| Min. unpunched length | 40 mm |
| Max. unpunched length | 800 mm |
| Max. punching thickness | 3.5 mm (1) |
| Punching operation | Foot pedal |
| Mechanical cycles per hour | 1,200 |
| Die type | Standard |
| Selectable punch pins (QSA) | Yes |
| Bespoke dies | No |
| Variable margin depth | Yes (1) |
| Die changeover time | 1 min |
| Machine dimensions L x W x H | 360 x 490 x 250 mm |
| Machine weight | 31 kg (2) |
| Machine packing dimensions L x W x H | 620 x 480 x 345 mm |
| Machine weight with packing | 34.5 kg (2) |
| Power requirement | 230/250V / 50 Hz / 250W 115/200V / 60 Hz / 250W |